MC-Fastpack: Compact, Safe, Fast and Easy

With the MC-Fastpack system, many injection and bonding applications can be performed easy, quick and safe.  It offers several technical and economic advantages. With the professional two-component technology, the MC-Fastpack system exploits the full potential performance range of our reactive resins. Versatility of the system offers technical and economic advantages.

Your advantages

  • Compact

    The combination of two-chamber cartridges and a compact pump makes MC-Fastpack resins particularly easy to process.

  • Safe

    Highly efficient static mixers ensure mixing accuracy, fluidity, plasticity and reactivity of MC-Fastpack injection or adhesives.

  • Fast

    Open the cartridge, attach the mixer, load the pump – done! Mixing and dispensing of the MC-Fastpack resins takes place in a single operation.

  • Directly processable

    With the MC-Fastpack Power-Tool, the Fastpack resins can be processed directly. Low pressure supports installation when injecting or bonding components.

Diversity

person
Injection system

Often it is small injection operations that have to be executed fast, safe and accurately. Be it elastic or rigid, the MC-Fastpack system offers solutions for all standard injection applications. The system is a comprehensive solution and completed by products available for both bore packers and adhesive packers; including adhesives.

person
Crack and joint filler

Filling wide cracks or joints has never been easier! With the MC-Fastpack system, injection materials and adhesives can be applied directly into a structure by easy discharge via the mixing tip into the damaged area.  The clean and wasteless installation takes place in one go!  

 

person
Coating system

High viscous reactive resins can be applied as small-area coatings or bandages. The application takes place in one go. Thanks to the 2C technology, fast-reacting resins can be used. Optimal thixotropy allows to easily work on vertical as well as overhead surfaces.

person
Adhesives

MC-Fastpack adhesives have excellent bonding properties with different construction materials. Reliability is assured whether used as a structural adhesive for anchors, as gluing adhesive for pull-off tests or for attachment of packers for injection procedures. Short curing time of the special adhesives reduces downtime and improves economic use.

Would you like to know more?

Use our contact form now and we will get back to you as soon as possible.

To the contact form

Elastic sealing

Filling cracks and smaller cavities with elastomer resins ensures durable sealing of structural elements. With low viscosity, high elasticity and chemical resistance, MC-Fastpack 2300 top seals cracks and cavities in structures permanently, even under dynamic stress.

MC-Fastpack 2300 top

person
Product properties

Very low viscosity

 Fast curing

 Highly elastic

 Waterproof under pressure

 Suitable for contact with potable water

 Chemically resistant

 CE-compliant with EN 1504-5

Areas of application

MC-Fastpack 2300 top is highly effective in flexible sealing of cracks, construction joints and cavities. The product is suitable for use in dry, damp and wet constructions above and below ground.

Would you like to know more?

Use our contact form now and we will get back to you as soon as possible.

to the contact form

Stopping water ingress and filling of voids

Cracks and cavities with high level of water ingress are sealed quickly and efficiently with MC-Fastpack Injekt LE. The rapidly expanding resin displaces water and seals leaks permanently with immediate effect.

MC-Fastpack Injekt LE

person
Product properties

Rapid curing

High increase in volume

Tough and elastic

Pressure resistant

Waterproof under pressure

Low relaxation

Suitable for contact with ground water

 

Areas of application

MC-Fastpack LE fills cracks, joints and cavities by rapid increase in volume and formation of an effective and highly durable seal. The resin stops pressurized as well as flowing water into civil engineering, hydraulic and underground infrastructures.

Water stop and structural strengthening of components

Cracks and cavities are sealed quickly and efficiently with MC-Fastpack 2700 under all moisture conditions. The expanding resin displaces water and reinforces components permanently.

MC-Fastpack 2700

person
Product properties

Low viscosity

Rapid curing

Foaming with water

Tough elastic

Resistant to compression and tension

Waterproof under pressure

Areas of application

MC-Fastpack 2700 seals and strengthens cracks, joints and cavities effectively and durable. The resin stops flowing water and improves the load-bearing capacity of components in constructions above and below ground as well as in water and sewage constructions.

 

Would you like to know more?

Use our contact form now and we will get back to you as soon as possible.

To the contact form

Strengthening and sealing

Filling cracks and cavities with rigid resins increases the load-bearing capacity and durability of structures. Highly flowable, moisture insensitive and chemically resistant, MC-Fastpack 1264 compact improves components resistance to high loads and helps them increase service life of structures.

MC-Fastpack 1264 compact

person
Product properties

Highly flowable

Moisture tolerant

Fast curing

Resistant to compression and tension

Waterproof under pressure

Highly chemical resistant

CE compliant with EN 1504-5

Areas of application

Cracks, joints and cavities can be filled with MC-Fastpack 1264 compact to achieve a force-transmitting and watertight seal. It can be used under dry and wet conditions in both buildings and civil engineering structures.

Would you like to know more?

Use our contact form now and we will get back to you as soon as possible.

To the contact form

Gluing, bandaging, injecting

The multifunctional MC-Fastpack PU solid is the right solution for gluing packers, surface sealing of cracks, direct injection of wide cracks, or as adhesive to crack-bridging bands. In addition, anchor holes, drill holes or breakouts can be filled efficiently.

MC-Fastpack PU solid

person
Product properties

Thixotropic polyurethane resin

Easy to trowel

Injectable into wide cracks and joints

Adheres well to mineral and metallic surfaces

Rapid curing

Viscoplastic firm

Crack bridging

person
Areas of application

With MC-Fastpack PU solid, durable bonding of mineral, metallic and plastic construction materials can be done with high effectiveness. Wide cracks and joints can be closed directly. Gluing of adhesion packers, bandaging of cracks, and filling of openings and breakouts are some additional applications.

Gluing, anchoring, injecting

The multifunctional MC-Fastpack EP solid is the right solution for high-strength bonding of packers, sealing of cracks, direct injection of wide cracks or bandaging of cracks. In addition, the sealing adhesive can be used to close anchor holes, drill holes or breakouts.

MC-Fastpack EP solid

person
Product properties

Thixotropic epoxy resin

Moisture tolerant

Easy to apply with a spatula

Injectable into joints

Adheres well

Rapid curing

Resistant to compression and tension

person
Areas of application

With the MC-Fastpack EP solid, mineral, metallic and plastic construction materials as well as adhesive packers for injection operations can be bonded effectively. Wide cracks and joints can be closed, cracks bandaged, and openings and breakouts filled and leveled.

 

 

Gluing, anchoring, doweling

MC-AnchorSolid E820 is the technically and economically convincing solution for the force-fit bonding of fastening elements in concrete. Thanks to the 2-component cartridge technology, the adhesive system can be used immediately, is easy to handle, and always maintains best application properties.

MC-AnchorSolid E820

person
Product properties

Thixotropic Epoxyresin

Moisture tolerant

Rapid strength development

Easy to trowel

Adheres well

Resistant to compression and tension

European Technical Assessment ETA-15/0506

Areas of application

The MC-AnchorSolid E820 is used to glue anchors, dowels, threaded rods and connecting reinforcement. The anchor adhesive is extensively tested and well suited for bonding metallic built-in parts with European Technical Assessment ETA-15/0506 for diameters from 8 to 20 mm.

Would you like to know more?

Use our contact form now and we will get back to you as soon as possible.

to the contact form

Would you like to know more?

Do you need more information or would you like to request an offer directly? Contact us now and we will get back to you as soon as possible.

Send
abs 123 abs 123 abs 123 abs 123 abs 123 abs 123 abs 123