The Boost for highly resistant industrial floors

Apr 04, 2023

Whether cleaning with superheated steam, strong temperature changes or aggressive chemicals - industrial floors are exposed to a variety of stresses in daily practice. The MC-DUR PowerCoat industrial flooring system from MC-Bauchemie easily withstands these severe stresses. With MC-DUR PowerCoat Cat, a new product has now been developed that significantly accelerates the curing of this PU/mineral hybrid flooring.

The addition of the accelerator MC-DUR PowerCoat Cat ensures significantly faster through-curing of the freshly laid industrial floor. An effect that may become necessary, especially at low ambient temperatures, to enable rapid commissioning of the surfaces.
The addition of the accelerator MC-DUR PowerCoat Cat ensures significantly faster through-curing of the freshly laid industrial floor. An effect that may become necessary, especially at low ambient temperatures, to enable rapid commissioning of the surfaces.
© MC-Bauchemie 2024

Industrial floors are subject to numerous extreme stresses, which can also occur in combination. Conventional specialty floors reach their limits here, as their advantages are often limited to only one performance range. MC-DUR PowerCoat from MC offers a solution here: the PU/mineral hybrid flooring system withstands a wide range of extreme stresses because it is extremely resistant to chemical, mechanical and thermal stresses at the same time. Whether brewery, meat processing, confectionery production or washing plant - the products of the MC-DUR PowerCoat range are used in a wide variety of applications. Read more in our press release about the launch of the MC-DUR PowerCoat flooring system in 2022.

Acceleration with MC-DUR PowerCoat Cat

MC has now expanded the system with MC-DUR PowerCoat Cat. The accelerator ensures faster through-curing of industrial floors, especially at low temperatures. This enables the repaired areas to be put into operation quickly. After just five hours, the floor can be walked on or reworked, and after only twelve hours, even water is no longer a problem. The performance of this PU/mineral hybrid floor remains fully intact.

This is how it works

After a mixing time of two minutes, the new accelerator is completely added to the systems of the MC-DUR PowerCoat range and the mixture is homogenized for another minute. The dosage of MC-DUR PowerCoat Cat depends on the processing temperature. The lower the temperature, the more accelerator is added. In this way, an extremely robust and durable floor covering can be installed in a short time.

abs 123 abs 123 abs 123 abs 123 abs 123 abs 123 abs 123